Brief introduction of operation steps of industrial dryer Henan Hongxing


Product search:

Brief introduction of operation steps of industrial dryer

Industrial drying machine The heat source of the dryer comes from the combustion device, and the dryer adopts the forward flow heating mode. Therefore, the material is pushed into the chute body by the feeding plate.

 Industrial drying machine

Operation steps of industrial dryer

1. Open the door, evenly rotate the dehydrated material in the drum, and then close and lock the door.

2. According to the fabric type, select the appropriate time and adjust the timing device to the required time.

3. Press the start button to start the fan. According to the user's needs, the rotation direction of the drum can be selected as one-way rotation or two-way rotation. As long as the computer board switch is turned to one-way or two-way, the machine will perform one-way or two-way operation according to the requirements. (forward rotation 25 seconds, stop 5 seconds, reverse 25)

4. Often watch the internal fabric overturning from the observation window. In case of any accident, the power supply should be cut off in time.

5. When the machine runs to the specified time, the machine will stop automatically. At this time, the operator must open the door to dry the inner fabric. If not, the time can be extended appropriately.

Copyright (c) 2015-2016 address: No.8 Tanxiang Road, high tech Zone, Zhengzhou City, Henan Province