Slag dryer Henan Hongxing

波多野结衣在线

Your current location is: Home page > Product Center > Dryer equipment >Slag dryer
Product search:
 Slag dryer

Slag dryer

Slag dryer or slag dryer is also a kind of rotary dryer, mainly composed of rotary cylinder, induced air equipment, high-speed scattered equipment, lifting plate, self cleaning device, transmission device, conveying equipment, hot air equipment, reducer, support device and sealing device

Summary of slag dryer

Slag dryer or slag dryer is also a rotary dryer, which is mainly composed of rotary cylinder, induced draft equipment, high-speed dispersing equipment, lifting plate, self-cleaning device, transmission device, conveying equipment, hot air equipment, reducer, support device and sealing device. Slag dryer has the advantages of reasonable design, excellent production, stable performance, advanced technology, high output, low energy consumption, small occupation area and high mechanization. Slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag, slag.

Slag dryer is also a kind of rotary dryer, it is mainly made up by rotary cylinder, wind equipment, high-speed scattered equipment, feed plate, the cleaning device, transmission device, transmission equipment, hot air equipment, deceleration machine, supporting devices, sealing device, etc. The slag dryer has a reasonable design, perfect workmanship, stable performance, advanced technology, high output, low energy consumption, cover small area and high mechanization degree. Slag, river sand, limestone, clay, quartz sand, grain slag, slurry and sludge with strong wet and large size can be dried by the slag dryer.

 Slag dryer

Performance characteristics of slag dryer

1. The slag dryer produced by our factory can meet the requirements of different users on the particle size and moisture content of slag, fly ash and other materials after drying.

2. The equipment has large capacity, strong overload resistance and less fuel consumption, which can directly reduce your drying cost.

3. In order to achieve the drying of slag dryer in the design, the forward flow drying method is adopted. The material and heat source air flow enter the drying equipment from the same side. The outlet temperature of the dryer is low and the thermal efficiency is high.

4. Slag dryer uses a new type of feeding and discharging device, which can reduce the load of dust removal system for you.

5. The slag dryer has innovated in the internal structure, strengthened the cleaning and heat conduction of dispersed materials, and eliminated the sticking phenomenon on the inner wall of the cylinder.

 Slag dryer

Working principle of slag dryer

Slag is sent to the hopper by belt conveyor or bucket elevator, and then enters the feeding end through feeding pipe through the feeder of hopper. The dryer cylinder is a rotating cylinder slightly inclined to the horizontal line. The material is added from the higher end, and the heat carrier enters from the low end. With the rotation of the cylinder, the material moves to the lower end under the action of gravity. When the wet material moves forward in the cylinder, the heat is directly or indirectly obtained from the heat carrier, so that the wet material can be dried, and then sent out by belt conveyor or screw conveyor at the discharge end.

The slag is sent into the hopper by the belt conveyor or bucket elevator and sent into feed end through feeding pipe of feeder hopper. The dryer cylinder is a rotating cylinder with slight incline to the horizontal line. The materials are sent from the higher end and the heat-carrying agents are sent from the lower end to be countercurrent contact with the materials. Some heat-carrying agents and materials flow altogether into the end of the barrel with the gravity effect as the rotation of the cylinder. In the process of moving forwardness in the barrel, the wet materials are directly or indirectly gained the heat of the heat-carrying agent and be dried, then the discharge end discharges finished products through belt conveyor or screw conveyor.

Slag dryer manufacturer

Henan Hongxing Mining Machinery Co., Ltd. is located in Zhengzhou City, Henan Province. Is a large slag dryer manufacturers, the production of slag dryer with reasonable layout, easy installation and other advantages. New customers are welcome to visit the new slag dryer.

Slag dryer manufacturer address: China - Henan - Zhengzhou - high tech Industrial Development Zone - Tanxiang road - 8.

Related products

  •  Sand Dryer
    Sand Dryer
  •  Hot air dryer
    Hot air dryer
  •  indirect dryer
    indirect dryer
  •  Rotary Dryer
    Rotary Dryer
Copyright (c) 2015-2016 address: No.8 Tanxiang Road, high tech Zone, Zhengzhou City, Henan Province