Sleeve dryer, energy-saving sleeve dryer - Henan Hongxing

波多野结衣在线

Your current location is: Home page > Product Center > Dryer equipment >Sleeve dryer
Product search:
 Sleeve dryer

Sleeve dryer

Sleeve dryer is also called energy-saving sleeve dryer, which has certain advantages compared with other dryers. It is an energy-saving and efficient drying equipment based on the original high humidity material dryer. ...

Overview of sleeve dryer

Sleeve dryer is also called energy-saving sleeve dryer, which has certain advantages compared with other dryers. It is an energy-saving and efficient drying equipment based on the original high humidity material dryer. Through the use of users and the research and development of scientific researchers, it has reached the international advanced level. It can not only deal with low viscosity and high moisture content materials, but also deal with high water content materials with high viscosity.

The sleeve dryer is suitable for drying all kinds of dregs with water content less than 85%, such as brewer's grains, alcohol lees, fruit dregs, medicine dregs, sauce lees, sugar dregs, starch dregs, livestock excrement, slaughtering wastes, etc., which is good for developing feed resources, reducing feeding costs and reducing environmental pollution.

 Sleeve dryer

It is improved on the basis of the traditional high humidity material drying machine to be an energy-saving dryer with high efficiency. Now it has reached the advanced international level after continuous improvement which can not only process the high humidity materials with both weak and strong stickiness.

It is used to dry all kinds of slag materials with humidity less than 85% like brewer’s grain, alcohol grain, fruit grain, medicine slag, sauce grain, sugar grain, starch slag, animal faeces and butcher leftovers.

Performance characteristics of sleeve dryer

1. There is no air leakage and the sealing is difficult. The installation can be completed within 2 hours.

2. The final moisture index can be easily controlled according to the user's requirements.

3. When the discharge temperature is less than 50 ℃, it can be directly fed into the material warehouse without entering the cooling shed for cooling.

4. The temperature of the outer cylinder is 60 ℃ and the temperature of waste gas is less than 100 ℃. The bag of dust removal equipment can be used for more than twice as long as water vapor comes out.

5. The coal consumption is 1 / 3 of that of single drum dryer, and the power saving is 40%. The coal consumption per ton is less than 9 kg, the annual coal saving of small dryer is 50-100, and that of large dryer is 100-200.

6. The equipment investment is 1 / 6 of the imported products. It is made of alloy steel plate, which is 3-4 times more wear-resistant than ordinary steel plate.

 Sleeve dryer

Working principle of sleeve dryer

The material enters the inner layer of the rotary drum of the energy-saving sleeve dryer through the feeding device, and is dried downstream, The material in the inner layer of the sheet is continuously copied up and scattered in a spiral way In heat exchange, the material moves to the other end of the inner layer and enters into the middle layer for countercurrent drying. The material is repeatedly raised in the middle layer, showing a moving mode of two steps forward and one step backward. In the middle layer, the material not only fully absorbs the heat emitted by the inner drum, but also absorbs the heat of the middle drum, and extends the drying time. The material reaches the drying state here. The material moves to the other end of the middle layer and falls into the outer layer. The material moves in a rectangular multi loop way in the outer drum, so that the dry material can move quickly under the action of hot air and discharge the drum. The wet material that has not reached the drying can not move fast because of its own weight. The material is fully dried in this rectangular plate, and the energy-saving sleeve dryer is used to complete the drying purpose.

Materials enter the inner side of the drum through the feeding device to realize current flow drying process. They get raised and scattered under the shoveling plate in a spiral advancing way to exchange heat. Then the materials enter the middle layer of the inner wall through the other end to realize counter current drying process. They are lifted in over and over in the middle layer which advance in two-steps forward and one-step back way. They absorb heat from both inner drum and middle drum, which extend the drying time and realize the best drying condition. Finally, materials fall into the external layer of the drum from the other end of the middle layer, processing in a rectangle multi-loop way. The dried materials move quickly out of the drum under the hot air, while the wet ones remain because of their own weight. Materials are dried completely inside the rectangle shoveling plate and then cooled by the single drum cooler, thus finishing the whole drying process.

 Sleeve dryer

Manufacturer of sleeve dryer

Henan Hongxing Mining Machinery Co., Ltd. is located in Zhengzhou City, Henan Province. Is a large sleeve dryer manufacturer, the production of sleeve dryer with reasonable layout, easy installation and other advantages. The price of sleeve dryer is reasonable, welcome new and old customers to visit our factory.

Sleeve dryer manufacturer address: China - Henan - Zhengzhou - high tech Industrial Development Zone - Tanxiang road - 8.

Related products

  •  Sand Dryer
    Sand Dryer
  •  Hot air dryer
    Hot air dryer
  •  indirect dryer
    indirect dryer
  •  Rotary Dryer
    Rotary Dryer
Copyright (c) 2015-2016 address: No.8 Tanxiang Road, high tech Zone, Zhengzhou City, Henan Province